Pi5 - Process Image Viewer Parameter (Pi5) - Honeywell INNCOM e7w User Manual

3. Press MODE button. This action displays PA value (14 displayed as default PA value).
4. Use the UP/DOWN arrow buttons to change the PA value.
5. Press the FAN button to store the value. The e7w play beep sound.
6. Press the FC button to return SERVICE MODE or press UP arrow button to display next
mode
Or
Press the FC button twice to exit SERVICE MODE
PI5 – Process Image Viewer Parameter (Pi5)
Use Pi5 mode to read any Process Image (PI) offset value 0-31 from the HVAC partner device. The Pi5
Process Image viewer is an advanced feature intended to be used by an INNCOM technician for ad-
vanced troubleshooting.
1. Enter SERVICE MODE
2. Press UP/DOWN arrow buttons to select Pi5.
3. Press MODE button. This action displays Pi5 value of 0.
INNCOM e7w THERMOSTAT USER GUIDE
59 31-00302-01