Auto Sensor Programs - Panasonic NN-CD87KS Manual

Auto Sensor Programs

This feature allows you to cook or reheat foods without entering the weight.
The built-in sensor measures the humidity of the food and calculates the
recommended microwave power level together with a suggested cooking time.
How it works
Once the food has been selected and
Start is pressed the food is heated
up. As food begins to get hot, steam
is emitted. When the food reaches
a certain temperature and begins to
cook, an even greater amount of steam
is released. The increase in steam
emission is detected by a humidity
sensor in the oven. This acts as a signal
Adjust to Taste
The Sensor programs cook foods for average tastes. You are able to adjust the
cooking programs to your own taste. After pressing Start, +/- symbol and flashing
bar appears in the display, turn dial clockwise for more time or anti- clockwise for
less time. This operation should be completed within 14 seconds. Default mode is
normal.
To allow auto program
operation, ensure the
oven is in Clock mode.
Select the desired Auto
Sensor program by
turning the dial.
40
for the oven to calculate how much
longer the food needs to cook. The
remaining cooking time will appear in
the display window after two beeps.
Whilst the Sensor program is still in the
display window the oven door should
not be opened. Wait until the cooking
time appears in the window, and then
open the door if required, to stir or turn
the food.
Press the dial to confirm
the program. Auto
program number
appears in the display.
The microwave and
sensor auto symbols
appear in the display
and frozen food symbol if
applicable.
Press Start