Care Of Your Oven; Questions And Answers - Panasonic NN-CD87KS Manual

Questions and Answers

Q: The oven stops cooking by
microwave and 'H97' or 'H98'
appears in the display. Why?
A: This display indicates a problem
with the microwave generation
system. Please contact an
authorised Service Centre.
Q: I can't set an auto cook program
and 'GARRAUM ZU WARM'
appears in the display. Why?
A: If the oven has previously been
used and it is too hot to be used
on an Auto Sensor Cook Program,
'GARRAUM ZU WARM' will
appear in the display window.
After the 'GARRAUM ZU WARM'
disappears, the Auto Sensor
Cook Programs may be used. If
in a hurry, cook food manually by
selecting the correct cooking mode
and cooking time yourself.

Care of Your Oven

1. Turn the oven off before cleaning.
2. Clean the inside of the oven, door
seals and door seal areas regularly.
When food splatters or spilled
liquids adhere to the oven walls,
door seals and door seal areas
wipe off with a damp cloth. Mild
detergent may be used if they
get very dirty. The use of harsh
detergent or abrasive is not
recommended.
Do not use commercial oven
cleaners.
3. Do not use harsh, abrasive
cleaners or sharp metal scrapers
to clean the oven door glass since
they can scratch the surface, which
may result in shattering the glass.
4. The outside oven surface should
be cleaned with a damp cloth. To
prevent damage to the operating
parts inside the oven, water should
Q: The fan continues to rotate after
cooking. Why?
A: After using the oven, the fan motor
may rotate to cool the electrical
components. This is normal and you
can continue using the oven at this
time.
Q: The operation guide has
disappeared on my display, I can
only see numbers. Why?
A: The operation guide was turned off
by pressing Timer/Clock 4 times.
When colon or time of day is
displayed, press Timer/Clock
4 times to turn the operation guide
back on (see page 17).
not be allowed to seep into the
ventilation openings.
5. If the control panel becomes dirty,
clean it with a soft, dry cloth. Do not
use harsh detergents or abrasives
on the control panel. When
cleaning the control panel leave the
oven door open to prevent the oven
from accidentally turning on. After
cleaning touch Stop/Cancel button
to clear display window.
6. If steam accumulates inside or
around the outside of the oven
door, wipe with a soft cloth. This
may occur when the oven is
operated under high humidity
conditions and in no way indicates
a malfunction of the unit.
7. It is occasionally necessary to
remove the glass tray for cleaning.
Wash the tray in warm soapy water.
49