Troubleshooting; Error Code Sheet - Pure Clean PUCRC90 User Manual

1. ERROR CODE SHEET

When the robot meets with some routine troubles, it will remind you by a
beep.
• Short tone
NO. Tone
01
02
03
NOTE: If all above solutions don't work, please take below actions.
1. Reset the robot by re-turning on the power switch.
2. If reset action doesn't work, please send the robot to seller for repairing.
REMARK:
The storage temperature of this product is -68°F to 140°F
Cause
Wheels don't work
Cli sensor or bumper
sensor failure
Main body gets stuck
11

Troubleshooting

Solution
Check the wheels
or side brushes
Clean cli sensor and
shake bumper slightly,
check if there's
foreign matter
Move main body
and start again
www.PyleUSA.com