Table of Contents
Advertisement
TROUBLESHOOTING
No.
Prompt Tone
1
Wheels o the ground
2
Dust box not installed
3
Battery failure
Please check if the
4
wheel is stuck
Please check if the
5
front collision is stuck
Robot connection
6
failed
The battery is low,
7
please charge the
machine
Please check whether
8
the side brush is
tangled or jammed
Please move the
9
machine to the open
area.
Cause of Failure
Robot suspended
Dust box removed
and not installed
Abnormal battery
charging
Wheel jammed
Front impact bracket
stuck
Machine failed to
connect to server
Battery power less
than 20 %
Abnormal edge
brushing
The machine failed
to get out of trouble.
Solution
Please put the Robot back
to the ground and press
the cleaning key again.
Return the dust box to the
Robot and press the
cleaning key again.
Contact after-sales test
battery
Check whether the wheel
is entangled with foreign
objects and clean up the
entangled objects.
Check whether the front
collision can rebound
normally
Check whether the wireless
network connected during
distribution can connect to
the internet
The machine automatically
enters the recharge mode
Check whether the side
brush is wound by wire
and clean up the wound
Please move the Robot to
an empty place and press
the cleaning key again.
www.PyleUSA.com
14
Hide quick links:
Advertisement
Table of Contents
