Product Maintaining; Cleaning Side Brushes; Cleaning Dust Bin And Filters; Cleaning Sensors - Pure Clean PUCRC90 User Manual

1. Cleaning Side Brushes

Clean the side brushes when it gets dirty and replace if it's damaged.
NOTE:
Before replacing side brushes, check and match "L" "R" mark on both side brush
and bottom of robot.
2. Cleaning dust bin and lter
Clean and empty dust bin after each use, steps are as shown in below figures.
NOTE:
After taking out dust bin, check whether there is foreign matter stuck in suck
passage and clean it. Wash HEPA filter after 15-30 days' use. And replace it after
use for 6 months at maximum.
Install both HEPA and primary filters when they are dry.
•
• HEPA and primary filter could be replaced if needed.
J
U
3. Cleaning cli sensors and auto charging pins.
Slightly clean the sensor window and auto charging
pins with a soft dry cloth
NOTE:
Charge connecting points on charging home
base if it needs cleaning.
www.PyleUSA.com
7
P
10
*
`
.