Storage; Troubleshooting - Pure Clean PKSVB18WT User Manual

Smart robo garbage bin with built-in vacuum, motion sensing lid and fabric filter
Table of Contents

Advertisement

Storage:

1. Unplug unit and clean the inner collection bin and all lters before
storing.
2. Store the machine indoors and in a clean, dry place.
3. Never store the machine when it is still plugged in. Never wrap cord
tightly around the appliance. Please unplug the power cord and store it
in the collection bin. Do not put heavy load upon cord, as it could cause
the cord wear and break.
WARNING! TO AVOID ELECTRIC SHOCK, DO NOT USE THE MACHINE
OUTDOORS OR IN WET SURROUNDINGS.

Troubleshooting

Problem
Machine won't run
Machine won't run,
with "Beep" sound
Does not vacuum
debris
Sensors do not
activate
Suction is not strong
The cover won't close
Possible cause
1. Not rmly plugged in
2. Unit is in o status
3. Collection bin is not in
position
4. No power in wall plug
5. Blown house fuse o tripped
circuit breaker
6. Cover is not closed
1. Collection bin is taken out.
2. Collection bin is not
installed in place
1. Dirt inlet is blocked
2. Collection bin is full.
3.
Debris may be too large for inlet
Unit is not in AUTO mode
Filters may be dirty
1. Objects are detected
2. Cover gear is blocked
Possible solution
1. Plug in rmly
2. Turn the mode the MAN or
AUTO
3. Re-install the bin.
4. Check house fuse or circuit
breaker.
5. Have a quali ed licensed
electrician replace house fuse
or reset circuit breaker.
6. Press the close button.
Re-install the collection bin in a
right place
First, turn the power o .
1. Clean path of dirt inlet.
2. Empty collection bin
3. Clear large debris
Turn the AUTO mode
1. Turn OFF the power
2. Clean the dirt lter
Remove the object
www.PyleUSA.com
8

Advertisement

Table of Contents
loading

Table of Contents