Front Panel Frame; Chemicals Compatible With 4612T Frame; Chemicals Not Compatible With 4612T Frame - Xycom 4600 Series User Manual

4600 Series Flat Panel Industrial PC

Front Panel Frame

The front panel frame for all the 4612's and 4615's is made of powder-coated
aluminum. The key ingredients are pure polyester, TEPIC-G, titanium oxide,
barium sulfate, leveling agent, and carbon black. Material that may come in
contact with the 4615 unit should be carefully evaluated under end-use conditions
for compatibility. See Table 4-1 and Table 4-3 for a list of compatible chemicals.

Chemicals Compatible with 4612T Frame

Table 4-1 should be used only as a guide. Specific testing should be conducted to
verify that the unit's finish would meet the demands of extreme environments.
Aliphatic
hydrocarbons
Aromatic
hydrocarbons
Detergents,
+
cleaners
Cooling liquid
++
(gylcol)
++ very good – found unaffected in its performances with regard to time, temperature and stress
+ good – found acceptable in normal exposure; long terms exposure may result in minor loss of properties; higher
temperatures may result in major loss of properties
+/● fair – found marginal; only for short exposures at low temperatures or when loss of mechanical properties is not
critical

Chemicals Not Compatible with 4612T Frame

The following chemicals are known not to be compatible with the 4612 front panel
frame:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 4-1. 4612 Front Panel Frame Chemical Compatibility
+
Alcohols
+
+
Inorganic acids
+
Waxes (heavy oils)
Brake fluid (heavy
+
alcohol)
Table 4-2. Chemicals Not Compatible with the 4612 Frame
Phenols
Partly halogenated
hydrocarbons
Alkalis
54
+/●
Ketones
●
Organic acids
++
Greases (non-reactive
++
organic esters)
Oils (unsaturated aliphatic
++
mixtures)
Oxidizing acids
Fully haolgenated
hydrocarbons
Chapter 4 – Maintenance
+/●
Esters
+
Ethers
++
Petrol
+
UV
144732 (C)