Table of Contents
Advertisement
Installation
3.
4.
5.
6.
22
Powerware
9125 Two-in-One (5000/6000 VA) PDM User's Guide
®
Figure 9. REPO Connector
Verify that the externally-connected REPO switch is not
activated to enable power to the UPS output receptacle.
Plug in the UPS and start the UPS by pressing the On button.
Activate the external REPO switch to test the REPO function.
De-activate the external REPO switch and restart the UPS.
Rev B www.powerware.com
S
Advertisement
Table of Contents
