Tower Setup - Powerware PowerPass 9125 User Manual

Installation

Tower Setup

The UPS and any optional cabinets must be stabilized with joining
brackets.
1.
NOTE
UPS and EBM) as shown in Figure 4.
2.
14
Powerware 9125 Two-in-One (5000/6000 VA) PDM User's Guide
®
Carefully position the cabinets upright (see Figure 4).
The PDM must be installed to the right of the UPS (between the
UPS
Figure 4. Tower PDM Configuration
Align each joining bracket with the adjacent cabinet screw holes
and secure with the supplied screws (see Figure 5).
PDM EBM
Rev B www.powerware.com
S