Flange Mount - Siemens BT300 Manual

Siemens Industry, Inc. • 18
3.1.2

Flange mount

The drive can also be recessed into the cabinet wall or similar surface. A special flange mount option is
available for this purpose. For an example of a flange-mounted drive,
see Figure 9. Note the IP classes of different sections in figure below.
3.1.2.1 Flange mount - Frames FS4 to FS6
Figure 10. presents the dimensions of the mounting opening and Figure 11. the depth dimensions of the
drives with the flange mount option.
Figure 10. Flange mount cutout dimensions for FS4 to FS6.
Table 10. Flange mount cutout dimensions for FS4 to FS6 in mm (inches).
Frame
FS4 310 (12.2)
FS5 408 (16.06)
FS6 534 (21.02)
Cabinet wall
(or s im ilar)
Fr ont
Type1 / IP21
Figure 9. Example of flange mount (frame FS9).
Dr ive outline
Opening outline
A B
137 (5.39) 337 (13.27)
152 (5.98) 434 (17.08)
203 (7.99) 560 (22.04)
F
A
C
C D
144 (5.66)
160 (6.29)
211 (8.30)
24-hour support +1-800-877-7545 (Dial 2)
Mounting
Cabinet wall
or s im ilar
Re a r
Type12 / IP54
9070bt
9069.emf
E F
110 (4.33) 316 (12.44)
132 (5.19) 414 (16.29)
184 (7.24) 541 (21.29)