Siemens BT300 Manual page 42

Siemens Industry, Inc. • 42
Tightening torques of cable terminals:
Frame Type**
050X2—075X2
FS8
100X4—150X4 20/40
100X2—125X2
FS9
200X4—250X4
*. Cable clamping (e.g. Ouneva Pressure Terminal Connector)
** See Figure1:Type designation codes, in Chapter 2.
11
Expose the shield of all three cables in order to make a 360-degree connection with the
cable clamp.
Cable lug
Figure 39. Placing two cable lugs on top of each other
Table 23. Tightening torques of terminals
Tightening torque
Nm/lb-in.
Power and motor
terminals
[Nm] lb-in.
*
177/354*
20/40* 177/354*
Figure 40.
Connector
Cable lug
9015.emf
Tightening torque
Nm/lb-in.
EMC grounding
clamps
Nm lb-in.
1.5 13.3
1.5 13.3
9035.emf
24-hour support +1-800-877-7545 (Dial 2)
Power cabling
Tightening torque
Nm/lb-in.
Grounding terminals
Nm lb-in.
20 177
20 177