Siemens BT300 Manual page 44

Hide thumbs Also See for BT300:

Table of Contents

Siemens Industry, Inc. • 44

Check the connection of the earth cable to the motor and the drive terminals marked with

NOTE

: Two protective conductors are required according to standard EN61800-5-1. See

chapter "Earthing and earth fault protection" on page 5.

Connect the protective conductor using a cable shoe and an M8 screw (included in the

Accessories bag) on either of the screw connectors as advised in Figure 43.

M4x10

9224.emf

Figure 42.

9225.emf

Figure 43.

24-hour support +1-800-877-7545 (Dial 2)

Power cabling

Table of Contents