Maintenance - MULTIQUIP LD6 Operation Manual

Check Item
Visual check for fluid leaks
Check engine oil level
Change engine oil and filter
Service air cleaner pre-cleaner
Service air cleaner cartridge
Change hydraulic oil filter
3
Inspect electrical wiring for cuts,
abrasions or corrosion
Check all fasteners for tightness
Clean cooling system
Clean/replace spark plugs
Check valve clearance
Note 1 = Change oil after the first 5 to 8 hours of use, then every 100 hours.
Change oil every 50 hours when operating the engine under heavy load or in high temperatures.
Note 2 = Clean more often under dusty conditions or when airborne debris is present. Replace the air cleaner if very dirty.
Note 3 = Use Parker DuraClean ISO 46 hydraulic oil only.
LD6 RIDE-ON POWER TROWEL • OPERATION MANUAL — REV. #0 (02/10/20) — PAGE 33
Table 8. Maintenance Schedule
1
2
2
Periodic Maintenance Interval
Daily Every 25 hours Every 100 hours Every 400 hours
X
X
X
After the first 100 hours of operation,
then after every 250 hours of operation
After the first 50 hours of operation,
then after every 100 hours of operation
Every 100–400 hours
Every 100–400 hours

MAINTENANCE

X
X
X
X