MULTIQUIP Whiteman Series Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Trowels
  5. Whiteman series
  6. Manual
MULTIQUIP Whiteman Series Manual

MULTIQUIP Whiteman Series Manual

Ride-on power trowel
Hide thumbs Also See for Whiteman Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
SERIES
MODEL HTN-31VTCSL5
MODEL HTO-31VTCSL5
RIDE-ON POWER TROWEL
(B &S VANGUARD GASOLINE ENGINE)
Revision #6 (07/09/07)
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
P/N 12899

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Whiteman Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MULTIQUIP Whiteman Series

Summary of Contents for MULTIQUIP Whiteman Series

  • Page 1 OPERATION AND PARTS MANUAL SERIES MODEL HTN-31VTCSL5 MODEL HTO-31VTCSL5 RIDE-ON POWER TROWEL (B &S VANGUARD GASOLINE ENGINE) Revision #6 (07/09/07) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. P/N 12899...
  • Page 2 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...
  • Page 3 HTN/HTO-31V — PROPOSITION 65 WARNING Engine exhaust some its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints.
  • Page 4 HTN/HTO-31V — SILICOSIS/RESPIRATORY HAZARDS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basic component of sand, quartz, brick clay, granite and injury or illness, such as respiratory disease, cancer,...

  • Page 5: Table Of Contents

    HTN/HTO-31V — TABLE OF CONTENTS COMPONENT DRAWINGS MQ WHITEMAN — HTN/HTO-31V Nameplate and Decals Assembly ...... 42-43 RIDE-ON POWER TROWEL Pivot Assembly ..........44-45 (VANGUARD ENGINE) Steering Handles Assembly ....... 46-47 California Proposition 65 Warning ......2 Steering Assist Control Assembly ...... 48-49 Silicosis/Respiratory Warnings ........

  • Page 6: Training Checklist

    TRAINING CHECKLIST HTN/HTO-31V — TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s.

  • Page 7: Daily Pre-Operation Checklist

    DAILY PRE-OPERATION CHECKLIST HTN/HTO-31V — DAILY PRE-OPERATION CHECKLIST . l e e L . l e v r o t . l e i t i d t i P o i t t S - t i w o i t i r e l o r o i t...

  • Page 8: Safety Message Alert Symbols

    HTN/HTO-31V — SAFETY MESSAGE ALERT SYMBOLS HAZARD SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read, understand and WARNING - Lethal Exhaust Gases comply with the Safety Messages and Operating Instructions could result in injury to yourself and others.
  • Page 9 HTN/HTO-31V — SAFETY MESSAGE ALERT SYMBOLS CAUTION - Accidental Starting CAUTION - Respiratory Hazard ALWAYS place the engine ON/OFF ALWAYS wear approved respiratory switch in the OFF position, when protection when required. equipment is not in use. CAUTION - Rotating Blades CAUTION - Sight and Hearing Hazards ALWAYS keep hands and loose clothing from rotating blades.

  • Page 10: Rules For Safe Operation

    HTN/HTO-31V — RULES FOR SAFE OPERATION ■ Replace nameplate, operation and safety decals when they WARNING - Read this Manual become difficult to read. ■ ALWAYS check for loosened hardware such as nuts and Failure to follow instructions in this manual may lead to serious bolts before starting.
  • Page 11 HTN/HTO-31V — RULES FOR SAFE OPERATION Additional Safety Information WARNING - Clear Operating Area A handy safety manual for operating and maintenance personnel of concrete power trowels produced by the Association of ALWAYS make sure that the operating area is clear before Equipment Manufacturers (AEM) starting the engine.
  • Page 12 HTN/HTO-31V — RULES FOR SAFE OPERATION Towing Safety Precautions Battery The battery contains acids that can cause injury to the eyes and CAUTION - Transporting skin. To avoid eye irritation, always wear safety glasses or face shielding. Use well-insulated gloves when picking up the battery. Conform to Safety Towing Regulations before transporting Use the following guidelines when handling the battery.
  • Page 13 HTN/HTO-31V — RULES FOR SAFE OPERATION Maintenance Safety Emergencies ■ ALWAYS shut down the engine and disconnect battery before ■ ALWAYS know the location of performing service or maintenance functions. Contact with the nearest fire extinguisher . moving parts can cause serious injury. ■...
  • Page 14 HTN/HTO-31V — DIMENSIONS/SPECIFICATIONS (TROWEL) Figure 1. HTN/HTO Dimension Specifications i r e i f i o i t – A – . n i ) 4 . ) 9 . – B – . n i H – – t .
  • Page 15 HTN/HTO-31V — SPECIFICATIONS (ENGINE) i f i o i t g i r & r t S t t a i l o n i l s b l p s i . n i o r t l i O y t i .

  • Page 16: General Information

    This manual is included with the ride-on trowel at the time of shipping from Whiteman. Please contact your nearest Multiquip Dealer for a replacement should the original manual disappear. Blades The blades of the ride-on power trowel finish the concrete as they are swirled around the surface.
  • Page 17 HTN/HTO-31V — CONTROLS AND INDICATORS Figures 2 and 3 show the location of the controls, indicators and Oil Indicator Light - Lights red when oil pressure is low. general maintenance parts. Each control may perform more than 10. Water Indicator Light - Lights red when water one function.
  • Page 18 HTN/HTO-31V — CONTROLS AND INDICATORS 21. Radiator/Filler Cap – Holds coolant or water necessary to 30. Engine Dip Stick – Indicates engine oil level. Add oil as keep engine at a safe operating temperature. Remove this required. cap to add water or antifreeze. 31.

  • Page 19: Engine Components

    HTN/HTO-31V — ENGINE COMPONENTS Figure 4. Engine Components Governor Lever – This lever restricts engine speed (high The following refer to the basic engine components for reference idle or low idle) through a speed control device linked to (Figure 4). Refer to the manufacturer's engine manual for instructions the accelerator system.

  • Page 20: Setup

    HTN/HTO-31V — SETUP Trowel Setup Instructions There are two types of seats, depending on what type of trowel The purpose of this section is to assist the user in the setting up NOTE you have. J and B series trowels of a NEW trowel.

  • Page 21: Inspection

    HTN/HTO-31V — INSPECTION Gearbox Oil Level Check and clean battery terminals for corrosion. Check and keep battery electrolyte between upper and Check the gearbox oil level in both gearboxes lower limits indicated on the battery. Never operate or by removing the plug located on the side of recharge without sufficient fluid in the battery.
  • Page 22 HTN/HTO 31V — OPERATION Keep your foot OFF the gas pedal. If the engine is cold, Important Information Before You Start adjust the choke but in all circumstances, start the engine This ride-on trowel is equipped with a safety "safety stop at idle (without touching gas pedal).
  • Page 23 HTN/HTO-31V — OPERATION Steering Try adjusting the pitch of the blades. This can be done with the ride-on trowel stopped or while the trowel is moving, Two control levers located in front of the operator’s seat whatever feels comfortable. Test the operation of optional provide directional control for the trowel.

  • Page 24: Maintenance (Engine)

    HTN/HTO-31V — MAINTENANCE (ENGINE) Air Filter (As Required) MAINTENANCE Thoroughly remove dirt and oil from the engine and control area. When performing any maintenance on the trowel or engine, Clean or replace the air cleaner elements as necessary. Check follow all safety messages and rules for safe operation stated at the beginning of this manual.
  • Page 25 HTN/HTO-31V— MAINTENANCE (ENGINE) Changing Engine Oil (200 Hours) Oil And Fuel Lines ■ Check the oil and fuel lines and connections regularly for Change the engine oil after the first 50 hours of use, then change every 6 months or 200 hours. Drain oil leaks or damage.
  • Page 26 HTN/HTO-31V — MAINTENANCE (ENGINE/TROWEL) Radiator/Cooling System 1. Check and clean radiator fins. 2. Check cooling water. 3. Check radiator hoses for fatigue or cracking. 4. Check radiator cap sea. Figure 16. Spark Plug Gap Refer to your engine manual for additional information. Checking Drive V-Belts WARNING - BURN HAZARDS In order to inspect the the drive V-belts for signs of wear or,...
  • Page 27 HTN/HTO-31V — MAINTENANCE (TROWEL) Belt Changing Procedure The next step is to loosen the four engine mounting bolts and slide the engine toward the rear of the trowel. Slide the The belts need to be changed as soon as they show signs first belt over the clutch and place it on the upper drive pulley, of wear.
  • Page 28 HTN/HTO-31V — MAINTENANCE (TROWEL) ■ Pitch the blades as flat as possible and look at the WARNING - BURN HAZARDS adjustment bolts . They should all barely make contact with the lower wear plate on the spider. If you can see that one of ALWAYS allow the engine to cool before them is not making contact, some adjustment will be servicing.
  • Page 29 HTN/HTO-31V — MAINTENANCE (TROWEL) Spider Removal (Disassembly) b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off 1. Once it is determined that an adjustment is required, of the spider assembly. A slight tap with a rubber mallet remove the spider assembly from the gearbox shaft as may be necessary to dislodge the spider from the main follows:...
  • Page 30 HTN/HTO-31V — MAINTENANCE (TROWEL) 3. Should the trowel arm inserts (bronze bushing ) come out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 4.
  • Page 31 HTN/HTO-31V — MAINTENANCE (TROWEL) Arms with CLOCK-WISE blade rotation use Trowel Arm Adjustment the fixture arm in the UP position (A in Figure Shown in Figure 28 is the adjustment fixture with a trowel arm NOTE 39). Arms with COUNTER CLOCK-WISE inserted.
  • Page 32 HTN/HTO-31V — MAINTENANCE (TROWEL) Re-Assembly This bolt is the contact point of the trowel arm to the lower wear plate on the thrust collar. The goal of adjustment is to 1. Clean and examine the upper/lower wear plates and promote consistent blade pitch and finishing quality. thrust collar.
  • Page 33 HTN/HTO-31V — MAINTENANCE Often times, if the blades are incorrectly adjusted, they will Changing a Blade not be able to pitch flat. This occurs when the adjusting It is recommended that all blades on the trowel be changed bolts have been raised too high. Conversely, sometimes the at the same time .
  • Page 34 HTN/HTO-31V — MAINTENANCE Installing Pans Onto Finisher Blades 3 . Attach the blade tie-downs (Item #3) to the far side of the Z-Clip brackets (Item #4) with tie-down knobs (Item These round discs sometimes referred to as "pans" attach to the #2) as shown in Figure 33.

  • Page 35: Troubleshooting (Trowel)

    HTN/HTO-31V — TROWEL TROUBLESHOOTING l i k t i w o i t r o t l i K t i w u f l o i t c t i . y r i l p . l l a l i f r e t i t i n...

  • Page 36: Troubleshooting (Engine)

    HTN/HTO-31V — TROWEL TROUBLESHOOTING c e l i r t l a c o i t l c n r e t f o / t i w n i r i r i i t i d h t i .
  • Page 37 HTN/HTO-31V8-TC — ENGINE TROUBLESHOOTING . y t l l i n i l n i l n i l l i f n i l t l i f t c i . y r . y r l l i f l l i n i l .
  • Page 38 HTN/HTO-31V8-TC — ENGINE TROUBLESHOOTING t l i f l i f i t l a l i , e l l l a i t l i t l y l l y t l . y t l l i f .
  • Page 39 Multiquip. A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column. PAGE 40 — HTN 31V...

  • Page 40: Suggested Spare Parts

    HTN/HTO-31V — SUGGESTED SPARE PARTS Qty..... P/N ....Description 31 VANGUARD ENGINE 2 ....21870 .... SAFETY KILL SWITCH 20 ....0164B ... SCREW 1 to 3 Units 20 ....4514 ....SCREW (HHC 1/4-20 X 5/8) 20 ....16602 .... SCREW (HHC 3/8 -16 X 3/8) Qty.
  • Page 41 20947 HTN/HTO-31V — NAMEPLATE AND DECALS ASSY. NAMEPLATE AND DECALS ASSY. WARNING To avoid injury, you MUST read and understand operator’s manual before using this machine. This machine to be operated by qualified personnel only. Ask for training as needed. P/N 35137 BLADE PITCH LH...
  • Page 42 DECAL, HOT SURFACE DECAL, LIFT POINT DECAL, LUBRICATION DECAL, CLOCKWISE ROTATION DECAL, COUNTER-CLOCKWISE ROTATION 13118 DECAL, POWDER COATED 21589 DECAL, WHITEMAN SERIES 4.76 X 21.82 11092 DECAL, “CE” 35168 DECAL,ROTATING BLADE HAZARD,2.0 x 4.3 21455 DECAL,LIFTING/CRUSH HAZARD 36091 DECAL, HOT COOLANT 3.5 X 1.75 WRSDPU...
  • Page 43 HTN/HTO-31V — PIVOT ASSY. PIVOT ASSY. RIGHT SIDE LEFT SIDE PAGE 44 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 44...
  • Page 44 HTN/HTO-31V — PIVOT ASSY. PIVOT ASSY. PART NO PART NAME QTY. REMARKS 0166 A WASHER, LOCK, 3/8 MED. 10138 SCREW, SHS 1/4-20 X 1/2, N.P. 1023 SCREW, HHC 3/8-16 X 1 1/4 11248 PLATE, GEARBOX ADAPTOR 12412 ARM, PIVOT RIGHT HTN 12414 ARM, PIVOT RIGHT HTO 12413...
  • Page 45 HTN/HTO-31V — STEERING HANDLES ASSY. STEERING HANDLES ASSY. PAGE 46 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 46...

  • Page 46: Steering Assist Control Assembly

    HTN/HTO-31V — STEERING HANDLES ASSY. CONTROL STEERING (ASSIST) PART NO PART NAME QTY. REMARKS 0189 GRIP, HANDLE 0447 WASHER, FLAT, 1/2 SAE 0735 BEARING, CONE, TIMKEN #A6075 0735 A BEARING, CUP, TIMKEN #A6157 10176 NUT, NYLOC 1/2-13 11138 BEARING, P-BLOCK HOUSING 47MPB 11141 SPACER, ROD END 11142...
  • Page 47 HTN/HTO-31V — STEERING ASSIST CONTROL ASSY. STEERING ASSIST CONTROL ASSY. PAGE 48 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 48...
  • Page 48 HTN/HTO-31V — STEERING ASSIST CONTROL ASSY. STEERING ASSIST CONTROL ASSY. PART NO PART NAME QTY. REMARKS 0131 A SCREW, HHC 1/4-20 X 3/4 0447 WASHER, FLAT, 1/2 SAE 10024 NUT, NYLOC 1/4-20 10133 NUT, NYLOC 3/8-16 10136 WASHER, FLAT,3/8 SAE 10176 NUT, NYLOC 1/2-13 1023...

  • Page 49: Twin Pitch Assy. (Left/Right)

    HTN/HTO-31V — TWIN PITCH ASSY. (LEFT/RIGHT) TWIN PITCH ASSY. (LEFT/RIGHT) PAGE 50 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 50...
  • Page 50 HTN/HTO-31V — TWIN PITCH ASSY. (LEFT/RIGHT) TWIN PITCH ASSY. (LEFT/RIGHT) PART NO PART NAME QTY. REMARKS 4403 KNOB, SHIFT 3231 SPACER 1615 CRANK LEVER 1733 HARDENED WASHER 1616 SHOULDER BOLT 2620 SCREW, BHC 10 – 24 X 5/8 10114 WASHER, EXT. SHKP, #8 2621 FITTING GREASE 1162 A...
  • Page 51 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...
  • Page 52 HTN/HTO-31V — TWIN PITCH AND MITER BOX ASSY. (LEFT/RIGHT) TWIN PITCH MITER BOX ASSY. (LEFT/RIGHT) CONTINUED FROM , ITEM 47 SEE TWIN PITCH ASSY. TYPICAL BOTH LEFT AND RIGHT SIDES CONTINUED FROM , ITEM 53 SEE TWIN PITCH ASSY. COMPLETE MITER PART OF LEFT SIDE TWIN BOX ASSEMBLY PITCH TOWER ASSEMBLY...
  • Page 53 HTN/HTO-31V — TWIN PITCH AND MITER BOX ASSY. (LEFT/RIGHT) TWIN PITCH MITER BOX ASSY. (LEFT/RIGHT) PART NO PART NAME QTY. REMARKS 0181 B WASHER, LOCK, 1/4 MED 11583 U-JOINT, PITCH CONTROL 1162 A CAP, GREASE ZERK 10548 TUBE, PITCH CONTROL 11654 PIN, ROLL 1/8 X 1"...
  • Page 54 HTN/HTO 31V — ENGINE MOUNTING BRACKETS ASSY. ENGINE MOUNTING BRACKETS ASSY. PAGE 54 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 54...
  • Page 55 HTN/HTO 31V — ENGINE MOUNTING BRACKETS ASSY. ENGINE MOUNTING BRACKETS ASSY. PART NO PART NAME QTY. REMARKS 0202 SCREW, HHC 5/16-18 X 1 0300 B WASHER, FLAT, 5/16 SAE 21628 BRACKET, ENGINE MOUNT LEFT ....1 ......S/N CC0202200 AND ABOVE 1023 SCREW, HHC 3/8-16 X 1 1/4 10136...

  • Page 56: Muffler Assy. S/N Cc020199 And Below

    HTN/HTO 31V — MUFFLER ASSY. S/NCC020199 AND BELOW MUFFLER ASSEMBLY S/NCC0202199 AND BELOW PAGE 56 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 56...
  • Page 57 HTN/HTO 31V — MUFFLER ASSY. S/NCC020199 AND BELOW MUFFLER ASSEMBLY S/NCC0202199 AND BELOW PART NO PART NAME QTY. REMARKS 10463 CLAMP, 7” HOSE, SIZE 104 10208 MUFFLER W/ CLAMP 12194 HEAT SHIELD W/A, MUFFLER 10434 CLAMP, 2” HOSE 10855 CLAMP, 1-1/2 MUFFLER 60025 TAPE, 1/8 X 2 FIBERGLASS HI TEMP ..

  • Page 58: Muffler Assy. S/N Cc020200 And Above

    HTN/HTO 31V — MUFFLER ASSY. S/NCC020200 AND ABOVE MUFFLER ASSEMBLY S/NCC0202200 AND ABOVE PAGE 58 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 58...
  • Page 59 HTN/HTO 31V — MUFFLER ASSY. S/NCC020200 AND ABOVE MUFFLER ASSEMBLY S/NCC0202200 AND ABOVE PART NO PART NAME QTY. REMARKS 10463 CLAMP, 7” HOSE, SIZE 104 ......2 ..... MARCH 27, 2007 AND BELOW 10208 MUFFLER W/ CLAMP ........1 ..... MARCH 27, 2007 AND BELOW 12194 HEAT SHIELD W/A, MUFFLER .......
  • Page 60 HTN/HTO 31V — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 60 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 60...
  • Page 61 HTN/HTO 31V — FUEL TANK ASSY. FUEL TANK ASSY. PART NO PART NAME QTY. REMARKS 4514 SCREW, HHC 1/4-20 X 5/8 0181 B WASHER, LOCK, 1/4 MED. 0948 WASHER, FLAT, 1/4 SAE 12404 TANK, HTO/N 5 GAL., PLASTIC ...... 1 ..... MARCH 14, 2007 AND BELOW 12404 TANK, FUEL, STEEL ........
  • Page 62 HTN/HTO 31V — CLUTCH ASSY. CLUTCH ASSY. PAGE 62 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 62...
  • Page 63 HTN/HTO 31V — CLUTCH ASSY. CLUTCH ASSY. PART NO PART NAME QTY. REMARKS 12417 SCREW, HHC 5/8-18 X 2 4703 WASHER, LOCK, 5/8 MED. 12188 RETAINER, 1-7/16 BLM CLUTCH 11994 CLUTCH, F74H-3080 X 1-7/16” 10937 BELT, B37 GATES HP 11 11758 ADAPTOR, CLUTCH, 31HP.

  • Page 64: Radiator Guard/Overflow Bracket Assy

    HTN/HTO 31V — RADIATOR GUARD/ OVERFLOW BRACKET ASSY. RADIATOR GUARD/OVERFLOW BRACKET ASSY. NOTES: ITEMS WITHIN DASHED LINE ARE INCLUDED WITH ENGINE. REFER TO ENGINE PARTS MANUAL. PAGE 64 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 64...
  • Page 65 HTN/HTO 31V — RADIATOR GUARD/ OVERFLOW BRACKET ASSY. RADIATOR GUARD/OVERFLOW BRACKET ASSY. PART NO PART NAME QTY. REMARKS 60049 TRIM EDGE, 1/32 (62B3-1/32) 1.5 FT 12450 GUARD, RADIATOR (31 VAN) 11900 MOUNT, RADIATOR OVERFLOW 12464 SCREW, HHC M6-1.0 X 16mm HTN/HTO- 31V •...
  • Page 66 HTN/HTO 31V — V-BELT GUARD ASSY. V-BELT GUARD ASSY. PAGE 66 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 66...
  • Page 67 HTN/HTO 31V — V-BELT GUARD ASSY. V-BELT GUARD ASSY. PART NO PART NAME QTY. REMARKS 11819 SCREW, HHC 1/4-20 X 3/4 W/WASH 1605 SCREW, HHC M8-1.25 X 25mm 0161 C WASHER, LOCK, 5/16 MED. 12542 BELT GUARD/MUFFLER SPPT W/A ..1 ..... MARCH 27, 2007 AND BELOW 21036 BELT GUARD/MUFFLER SPPT W/A ..

  • Page 68: Engine Service Parts

    HTN/HTO 31V — ENGINE SERVICE PARTS ENGINE SERVICE PARTS PAGE 68 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 68...
  • Page 69 HTN/HTO 31V — ENGINE SERVICE PARTS ENGINE SERVICE PARTS PART NO PART NAME QTY. REMARKS 496018S SPARK PLUG 821075 FAN BELT 491056 OIL FILTER 825557 HOSE 825133 HOSE 820026 FUEL FILTER 820263 ELEMENT, AIR CLEANER HTN/HTO- 31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 69...
  • Page 70 HTN/HTO-31V — GEARBOX ASSY. (LEFT-SIDE) GEARBOX ASSY (LEFT-SIDE) PAGE 70 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 70...
  • Page 71 HTN/HTO-31 V— GEARBOX ASSY. (LEFT-SIDE) GEARBOX ASSY (LEFT-SIDE) PART NO. PART NAME QTY. REMARKS 12586 SHAFT, GEARBOX INPUT W/FAN ...... 1..... OCT. 07, 1999 AND BELOW 12906 SHAFT, GEARBOX INPUT W/FAN ...... 1..... OCT. 08, 1999 AND ABOVE 5031 A SCREW, RHM 1/4-20 X1/2 0948 WASHER, FLAT, 1/4 SAE ........
  • Page 72 HTN/HTO-31V — GEARBOX ASSY. (LEFT-SIDE) GEARBOX ASSY (LEFT-SIDE) PAGE 72 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 72...
  • Page 73 HTN/HTO-31 V— GEARBOX ASSY. (LEFT-SIDE) GEARBOX ASSY (LEFT-SIDE) PART NO. PART NAME QTY. REMARKS 2618 GASKET KIT ............1..... INCLUDES ITEMS W/+ 12833 BEARING KIT ............. 1..... INCLUDES ITEMS W/ 1313 SCREW, FHSC 3/8 - 24 X 3/4 PLAIN 9120 RETAINER, DRIVEN PULLEY 2048 COUPLER - 7/8”...
  • Page 74 HTN/HTO-31V — GEARBOX ASSY. (RIGHT-SIDE) GEARBOX ASSY (RIGHT-SIDE) PAGE 74 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 74...
  • Page 75 HTN/HTO-31V — GEARBOX ASSY. (RIGHT-SIDE) GEARBOX ASSY (RIGHT-SIDE) PART NO. PART NAME QTY. REMARKS 12586 SHAFT, GEARBOX INPUT W/ FAN ......1 ....OCT. 07, 1999 AND BELOW 12906 SHAFT, GEARBOX INPUT W/FAN ......1 ....OCT. 08, 1999 AND ABOVE 5031 A SCREW, RHM 1/4-20 X1/2 0948...
  • Page 76 HTN/HTO-31V — GEARBOX ASSY. (RIGHT-SIDE) GEARBOX ASSY (RIGHT-SIDE) PAGE 76 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 76...
  • Page 77 HTN/HTO-31V — GEARBOX ASSY. (RIGHT-SIDE) GEARBOX ASSY (RIGHT-SIDE) PART NO. PART NAME QTY. REMARKS 2618 GASKET KIT ............1 ....INCLUDES ITEMS W/+ 12833 BEARING KIT .............1 ....INCLUDES ITEMS W/ 1313 SCREW, FHSC 3/8 - 24 X 3/4 PLAIN 9120 RETAINER, DRIVEN PULLEY 2048 COUPLER - 7/8”...
  • Page 78 HTN/HTO-31V — DRIVE ASSY. DRIVE ASSY. LEFT SIDE 04/11/2000 AND ABOVE RIGHT SIDE NOTE: PROVIDES 145 RPM BLADE SPEED PAGE 78 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 78...
  • Page 79 HTN/HTO-31V — DRIVE ASSY. DRIVE ASSY. PART NO PART NAME QTY. REMARKS 0126 KEY, WOODRUFF #9 0161 C WASHER, LOCK, 5/16 MED 10133 NUT, NYLOC 3/8-16 10136 WASHER, FLAT 3/8 SAE ......8 ..APRIL 10, 2001 AND BELOW 10136 WASHER, FLAT 3/8 SAE ......
  • Page 80 HTN/HTO-31V — 5-BLADE SPIDER ASSY. (LEFT-SIDE) PAGE 80 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 80...
  • Page 81 HTN/HTO-31V — 5-BLADE SPIDER ASSY. (LEFT-SIDE) 5-BLADE SPIDER ASSY. (LEFT) PART NO PART NAME QTY. REMARKS 12791 SPIDER ASM, LEFT SIDE (1-1/4) ..... 1 ... INCLUDES ITEMS W/% 2829 ARM, TROWEL EXTENDED 9005 LEVER, TROWEL ARM LEFT SIDE 0166 A WASHER, LOCK, 3/8 MED 1876 NUT, HEX JAM 3/8...
  • Page 82 HTN/HTO-31V — 5-BLADE SPIDER ASSY. (RIGHT-SIDE) PAGE 82 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 82...
  • Page 83 HTN/HTO-31V — 5-BLADE SPIDER ASSY. (RIGHT-SIDE) 5-BLADE SPIDER ASSY. (LEFT) PART NO PART NAME QTY. REMARKS 12792 SPIDER ASM, LEFT SIDE (1-1/4) ..... 1 ... INCLUDES ITEMS W/% 2829 ARM, TROWEL EXTENDED 1986 LEVER, TROWEL ARM LEFT SIDE 0166 A WASHER, LOCK, 3/8 MED 1876 NUT, HEX JAM 3/8...
  • Page 84 HTN/HTO-31V — SEAT AND FRAME ASSY. SEAT AND FRAME ASSY. (VIEW FROM OPERATOR'S SEAT) PAGE 84 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 84...
  • Page 85 HTN/HTO-31V — SEAT AND FRAME ASSY. SEAT AND FRAME ASSY. PART NO PART NAME QTY. REMARKS 12109 FRAME, HTN SEAT W/A VAN 11829 FRAME, HTO SEAT W/A VAN 11660 PLATE, SEAT W/A HTN/HTO 21597 BUMPER, STEM ......... 3 ...MAR. 27, 2006 AND ABOVE 21507 PLUG, PANEL 11/16 DIA.
  • Page 86 HTN/HTO-31V — FRAME AND COMPONENTS ASSY. FRAME AND COMPONENTS VIEW FROM OPERATOR’S SEAT FUEL TANK REFERENCE ONLY NAMEPLATE REFERENCE ONLY PAGE 86 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 86...
  • Page 87 HTN/HTO-31V — FRAME AND COMPONENTS ASSY. FRAME AND COMPONENTS PART NO PART NAME QTY. REMARKS 12345 FRAME HTN-V 12453 FRAME HTO-V 4014 SCREW, 2-3/16 P-K TYPE U DRIVE 5065B SCREW, RHM 10-32X1/2 2203 WASHER, FLAT, #10 8126 CLAMP, HOSE SUPPORT 1/2” SMALL 4514 SCREW, HHC 1/4-20X5/8 0948...
  • Page 88 HTN/HTO-31V — FOOT PEDALS ASSY. FOOT PEDALS ASSY. PAGE 88 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 88...
  • Page 89 HTN/HTO-31V — FOOT PEDALS ASSY. FOOT PEDALS ASSY. PART NO PART NAME QTY. REMARKS 0202 SCREW, HHC 5/16-18X1 ..........4 ..UP TO ~JAN 01, 2007 0300B WASHER, FLAT, 5/16 SAE 10136 WASHER, FLAT, 3/8 SAE 2086 PEDAL, ACCELERATOR 2772 PIN, ACC MOUNT 5283 NUT, NYLOC 5/16-18...
  • Page 90 HTN/HTO-31V — THROTTLE ASSY. THROTTLE FOOT PEDAL ASSY. NOTES: SEE FOOT PEDALS ASSEMBLY. BRACKET, ENGINE THROTTLE CABLE. MOUNT TO ENGINE. REMOVE ITEM 1 P/N 937 AND REPLACE WITH ITEM 15, P/N 10019 ON UNITS MADE AFTER MAY 16, 2000 PAGE 90 — HTN 31V HTN/HTO-31V •...
  • Page 91 HTN/HTO-31V — THROTTLE ASSY. THROTTLE FOOT PEDAL ASSY. PART NO PART NAME QTY. REMARKS 0937 NUT, HEX 10-32 ............3 ... UP TO MAY 15, 2000 0937 NUT, HEX 10-32 ............2 ... MAY16, 2000 AND ABOVE 10237 WASHER, EXT. SHKP, 5/16 ........1 ... UP TO MAY,15 2000 2153 ROD END, 10-32 FEMALE RH 0300 B...
  • Page 92 HTN/HTO-31V — BATTERY ASSY. BATTERY ASSY. CONNECT TO ENGINE (CHASSIS GROUND) BLACK CABLE STARTER (NEGATIVE) NEG (-) POS (+) RED CABLE (POSITIVE) PAGE 92 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 92...
  • Page 93 HTN/HTO-31V — BATTERY ASSY. BATTERY ASSY. PART NO PART NAME QTY. REMARKS 0730 SCREW, HHC 1/4-20X1 0948 WASHER, FLAT, 1/4SAE 0949 NUT, HEX FINISH 1/4-20 10024 NUT, NYLOC 1/4-20 10031 WASHER, EXT SHKP, 1/4 10313 CABLE, NEG BATTERY BLACK 20” 19303 CABLE, POS BATTERY RED 48”...
  • Page 94 HTN/HTO-31V — SPRAY ASSY. SPRAY ASSY. 42” APPROX. STYLE STYLE NOTES: SEE WIRING DIAGRAM PAGE 94 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 94...
  • Page 95 HTN/HTO-31V — SPRAY ASSY. SPRAY ASSY. PART NO PART NAME QTY. REMARKS 0131A SCREW, HHC 1/4-20X3/4 0181B WASHER, LOCK, 1/4 MED. 0948 WASHER, FLAT, 1/4 SAE 10022 FITTING, PLASTIC 6BARB-4BARB 11222 MOUNT, SPRAY NOZZLE 12008 FITTING, 90° 6BARB-4BARB ..........1 .... UP TO APRIL 08, 2005 12009 SCREEN, FILTER DAPCO 11604 ........1 ....
  • Page 96 HTN/HTO-31V — CONTROL PANEL ASSY. FRONT PANEL ASSY. S/N HC61130 AND BELOW S/N HC61131 AND ABOVE NOTES: CHOKE CABLE ASSY. CONNECT TO CARBURETOR LINKAGE ELECTRONIC CONTROL UNIT (ECU) IS INCLUDED WITH ENGINE, SEE VANGUARD ENGINE OWNER’S MANUAL. PAGE 96 — HTN 31V HTN/HTO-31V •...
  • Page 97 HTN/HTO-31V — CONTROL PANEL ASSY. FRONT PANEL ASSY. PART NO PART NAME QTY. REMARKS 0202 SCREW, HHC 5/16-18 X 1 0300B WASHER, FLAT, 5/16 SAE 10019 NUT, NYLOC 10-32 10114 WASHER, EXT. SHKP, #8 10958 SWITCH, IGNITION VAN W/KEYS 11098 CIRCUIT BREAKER, 40A, 12V 11534 NUT, “U”...
  • Page 98 HTN/HTO-31V — E-Z MOVER AND LIFT HANDLE ASSY. E-Z MOVER (EMR2) AND LIFT HANDLE PAGE 98 — HTN 31V HTN/HTO-31V • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/09/07) — PAGE 98...
  • Page 99 HTN/HTO-31V — E-Z MOVER AND LIFT HANDLE ASSY. E-Z MOVER (EMR2) AND LIFT HANDLE PART NO PART NAME QTY. REMARKS 0189 HAND GRIP 2336 UPPER HANDLE 1869 SNAP PIN 7170 CLIP 11684 DOLLY AXLE 10440 WHEEL & TIRE 0655 SCREW, HHCS 5/16-18 x 3/4" 0300B FLAT WASHER 5/16"...
  • Page 100 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

This manual is also suitable for:

Htn-31vtcsl5Hto-31vtcsl5

Table of Contents