System Displays - Pyronix PCX 46 Engineer Reference Manual

Keyfob on If 'Yes' allows use of the wireless keyfob to disarm the system only when the Entry
Entry Door has been opened and entry time has started.
Wireless Bell The wireless bell has its own wireless supervision detection in addition to the general
Supervision wireless supervision used on all wireless accessories including the bell. If 'Yes' then the
wireless bell own supervision feature will be activated.
Download if If enabled, downloading from the InSite software to the panel is possible regardless of
Armed if the PCX is armed or not. If disabled, downloading will only be possible when the PCX
is disarmed.
6 Digit Codes All codes can either be 4,5 or 6 digits. If this option is enabled, all codes must be 6
digits.

5.13 System Displays

Please see page 4 for the 'Text Programming' section as this function involves programming different
text for the PCX system.
System Description
Displays
Area Texts You may choose how you want each area to be displayed, i.e. "Area A" may be used to
fully arm a house therefore you may want to call it "Full House Arm" for example. You
can have a maximum of 16 characters on the display.
Full Area This is the text that can be displayed if all the areas on the system are armed.
Text
Top Display The top display text is shown on the keypad in disarmed mode.
Text
Site Name The Site Name is used as a "Site Reference" which if used must be also used within
the PCX 46 Upload/Download Software in order for the software to connect to the PCX
system.
NOTE: The Site Name acts as an additional UDL password so, when set up a site
name make sure it is the same in the UDL otherwise a connection will not be possible.
Display If If programmed as 'yes' then the PCX keypad will display on the keypads when the
Armed system is armed. Program 'No' to ensure compliance with EN 50131.
Display If programmed as 'yes' then the system will display on the keypads any alarms
Alarms without requiring user to enter their code or tag. Program 'No' to ensure compliance
with EN 50131.
Ready LED If programmed as 'enabled', the 'OK' LED will illuminate whilst the panel is disarmed
ON and when all the inputs in the areas (that the keypad controls) are closed. Program
'No' to ensure compliance with EN 50131.
Display PAs If programmed as 'yes' then the system will display on the keypads any PA alarms
without requiring the user to enter their code or tag. Leave at 'No' to ensure
compliance with EN 50131.
Display If programmed as 'yes' then the system will display on the keypads any silent PA
Silent PAs alarms without requiring the user to enter their code or tag. Leave at 'No' to ensure
compliance with EN 50131.
Display If programmed as 'enabled', any inputs activated in disarmed mode will be displayed.
Inputs Program 'No' to ensure compliance with EN 50131.
Disarm LED If programmed as 'enabled', the disarm LED (green) will illuminate continuously whilst
ON the system is in the disarmed state. Program 'No' to ensure compliance with EN
50131.
PCX 46 Programming Reference
Page: 23