Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F Manual page 51

VisuNet GXP
VisuNet GXP
System Installation
Mechanical Installation
4. Prepare the other L-shaped bracket with the mounting screws.
5. Mount the prepared L-shaped bracket to the display unit housing (1), then affix both L-
shaped brackets with all screws to the stiffener frame (2).
1.
6. Tighten all screws in a criss-cross pattern using 1.8 Nm torque for the 14 x M5 x 25 socket
head cap screws and 4 Nm for the 10 x M5 lock nuts.
Panel Mount Grounding
Ground the device as shown below:
51
2.