Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F Manual page 19

VisuNet GXP
VisuNet GXP
System Installation
Mechanical Installation
Figure 3.6
Preparing the Pedestal for Connection to the Housing
1. Align the pedestal so that the cable glands point away from you.
2. The pedestal must be firmly screwed to the floor.
3. Bend the PE wire with a max. radius of 20 mm and place it within the pedestal tube.
4. Place the O-ring and sealant into the channel of the coupling.
19
Pedestal adapter hole pattern