Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F Manual page 36

VisuNet GXP
VisuNet GXP
System Installation
Mechanical Installation
Mounting HOLDER-BRACKET-XX00-IDMx61-B-N to AG-XX00 Housing
1. Open the housing. See chapter 3.3.3
2. Remove the cover plate on the outside right side of the AG-XX00 housing by opening the
wing screw that is located on the inside of the housing.
3. Connect the adapter (included with the holder bracket in delivery) to the bracket with the
enclosed screws.
4. From the inside-right of the AG-XX00 housing, use a hex key to put the first screw (with lock
washer and sealing washer) through one of the drilled holes on the bracket.
36