Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F Manual page 25

VisuNet GXP
VisuNet GXP
System Installation
Mechanical Installation
9. While continuing to manually secure the housing (e.g. by holding on to it), tip the display
panel toward you until the display comes to rest at its fully opened position, hanging down at
an angle from taut cables. Make sure to follow the steps as describe; otherwise, there is a
high risk of damaging the gasket.
10.Tigthen the M6 U-washers onto the pedestal bolts using a torque of 7.5 Nm.
Note
Optional: Secure the nuts with a medium-strength bolt adhesive such as Loctite® Threadlocker
Blue 243®
25