Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F Manual page 49

VisuNet GXP
VisuNet GXP
System Installation
Mechanical Installation
Required Components
• VisuNet GXP prepared for panel mounting (S1 option)
• Kit for wall mounting (WALL-BRACKET-XX00-3-304-N0), which includes 2 x L-shaped
panel mount brackets (1 left, 1 right), 1 x rectangular stiffener frame, 14 x M5 x 25 socket
head cap screws (torque 1.8 Nm), and 14 x M5 lock nuts (torque 4 Nm)
Required Installation Tools
• 8 mm socket wrench for mounting nuts
• 4 mm hex wrench for panel mount brackets
• Loctite® Threadlocker Blue 243®
All tools should be torque controlled if a torque is specified.
If the Panel Mount Option (S1) is chosen, you will receive a pre-assembled package consisting
of a DPU, a TCU/PCU, and a PSU.
The kit for panel mounting can be ordered separately. For ordering details, see chapter 4.1.
Note
There are two different mounting brackets—they are not identical items.
Panel Mounting the GXP
1. Mount the first L-shaped bracket to the back of the display unit. Use the bracket that has four
extra holes at the bottom.
1 L-shaped bracket with extra holes at the bottom
49
1