High and low brightness switch (fig. D)
To extend the run time of the spotlight the unit is fitted with a
brightness switch (2).
Slide the switch (2) forward towards the bulb to set the
spotlight on high beam.
Slide the switch (2) to the rear to set the spotlight on low
beam (extended run time).
Using the built-in carry lanyard
The carry lanyard (4) may be used to store or carry the
spotlight. Adjust the slide on the cords to keep the
lanyard secure around the supporting object.
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance or cleaning
on the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do
not immerse the appliance in water.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your appliance needs
replacement, or if it is of no further use to you, think of the
protection of the environment. Black & Decker repair agents
will accept old Black & Decker tools and ensure that they are
disposed of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Do not short-circuit the battery terminals.
Do not dispose of the battery in fire, as this may result in
Be aware that the battery is heavy.
Run the battery down completely, then remove it from
NiCd, NiMh, Lithium Ion and Lead Acid (Pb) batteries
are recyclable. They must not be disposed of with
household waste. Place the battery in suitable
packaging to ensure that the terminals cannot be short-
circuited. Take the battery to any authorised repair
agent or a local recycling station
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. Whether you need
technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you, or visit us at
AR, B2C, B3
Input current (max) mA
AR, B2C, B2
6V 3Ah SLA
12V 3Ah SLA
6V H3 35W
12V H3 55W
Black & Decker
18 - 24
18 - 24