Canon PC1000s Service Manual page 90

CHAPTER 2 USING THE MACHINE
#1 SSSW-S26: transmission function setting
Bit Function
1 0
Factory setting
0
n o t u s d
1
not used
2 broadcast transmission confu- ask do not ask 0
3 broadcast transmission prohibi- ask do not ask 0
tion
4 not used
5
not used
6 other party at time of broadcast
single
party
all parties
0
transmission susoension
- - - - -
7
error TX report at time of trans-
do not generate generate
0
mission suspension
[Bit
2 1
Use it to specify whether or not to indicate a confirm message to prevent the user from
making a broadcast by mistake when entering an address for a broadcast transmission.
[Bit 31
Use it to specify whether or not to use broadcast transmission to prevent the user from
making a broadcast by mistake when entering an address for a broadcast transmission.
[Bit 61
Use it to specify whether or not to suspend a communication to all parties when a broad-
cast transmission is suspended.
[Bit
71
Use it to specify whether or not to generate an error TX report when a transmission is sus-
pended by pressing the Stop key.
2-44
COPYRlGHTQ20M CANON INC.
CANON PClOOOslimageCLASS D600s REV.
1
AUG.2W