Canon PC1000s Service Manual page 378

CHAPTER
7
TROUBLESHOOTING
5.4.2
Wrinkles
Pickup assembly
1) 'hm off the power while the paper is being moved. At this time, is
the paper wrinkled or moving askew?
YES: Check the rollers of the pickup assembly and the registration roller
and the registration shutter. If damaged, replace the components.
Paper
2)
Is the paper placed correctly?
NO: Place the paper correctly.
Paper
3) Is the paper curled or wavy?
YES: Replace the paper, and advise the user on the correct method of stor-
ing paper.
Paper
4)
'lky
paper of a recommended type. Is the problem corrected?
YES: Advise the user to use recommended paper.
Fixing assembly inlet guide
5) Is the fixing inlet guide soiled, or is there foreign matter?
YES: Clean it. If there is any foreign matter, remove it.
NO: Replace the fixing assembly.
COPYRIGHT Q 2 W CANON INC. CANON PClOOOslimageClASS DM% REV. I 1G.2002