Canon PC1000s Service Manual page 342

CHAPTER
7
TROUBLESHOOTING
#021 [RX]
The other party has rejected the machine during polling reception
Cause:
When. starting a call, a subaddress, or a subaddress and a password, was not
specified.
Remedy:
Specify a subaddress, or a subaddress and a password, when starting a call.
#022 VX] Call fails
Cause: The data for an auto-dial number used when selecting a party was deleted.
Remedy: Register the telephone number of the other party as an auto-dial number, and
transmit once again.
#025 [TWRX] Auto-dial setting is wrong
Cause: The settings require registration of a subaddress for auto-dialing; however, a
call was attempted without registering a subaddress.
Remedy:
If auto-dialing is of a type requiring registration of a subaddress, register a
subaddress.
#037 [RX]
Memory has overflowed when receiving images
Cause:
The image memory overflowed during reception.
Remedy: Delete image data that is no longer needed, and ask the operator of the other
party to transmit once again.
#059
VX] Dialed number and the connected number (CSI) do not match
Cause: The user telephone number is not registered correctly on the receiving side.
Remedy:
I. Ask the operator of the receiving side to register the user telephone num-
ber correctly.
2 . Use manual transmission; then, after making sure that a connection has
been made, transmit once again.
Cause: The exchange malfunctioned, and the machine is not connected to the dialed
Party.
Remedy: Have the exchange checked.
#080 VX]
The other party is not equipped with an ITU-T-compliant
subaddress reception function
Cause: Bit 49 of DIS received from the other party is '0'.
Remedy: 1. Transmit to a fax machine equipped with a subaddress function.
2. Use normal G3 transmission.
COPYRIGKT
Q
2002 CANON INC.
CANON PClCOMmageCUISS D600s REV.
1
WG.2002