Putting Paper In The Cassette - Canon PC1000s Service Manual

CHAPTER 3 INSTALLATION
2 Unpacking and Installing the Machine
2.1 Before Starting
Go through the following before starting to install the machine:
If the machine is moved from a cold to a warm place for installation, con-
densation can develop in its pickupffeeding assembly, causing image faults.
To avoid the condensation, leave the machine unpacked for 1 hr or more so
that it will be fully used to the room temperature.
(The term condensation refers to the development of drops of water on a
mental surface when it is brought from a cold to warm place. This occurs as
a result of r a ~ i d cooling of vapor in the air.)
2.2 Installation Procedure
Install the machine in the following order; for details, see the appropriate sections that fol-
low; after installation, be sure to clean up the area around the machine:
1. unpacking
2. fitting the cartridge
3. putting paper in the cassette
4. putting paper in the manual feed tray
5. connecting the interface cable (if equipped with printer functions)
6. connecting the modular cable (if equipped with fax functions)
7. connecting the power cord
8. fitting the delivery tray
9. checking the copy images
10. setting the printer function (if equipped with printer functions)
11. setting the fax functions (if equipped with fax functions)
3-2
COPYRIGHT02002 CANON INC.
CANON PC1000srimageClASS D600s REV.
1
AUG. XKn