Canon PC1000s Service Manual page 258

CHAPTER 5 MECHANICAL SYSTEM
2.8.2
Pickup System
2.8.2.1 Removing the Original FeedJSeparation Roller Unit
1) Remove the ADF motor unit. (See
2.8.1.3)
2) Remove the Erring [I], gear [2], bush-
ing[3], and pin [4].
3) Remove the spring [S], screw [6], and
plate
171.
4) Remove the E-ring [8], gear
[9], belt
[lo], and bushing [l 11.
5-56
COPYRIGHT(~~M)~CANON INC.
CANON FClOOOslimageCCASS REV. 1 AUG. 2002