CHAPTER 7 TROUBLESHOOTING
1.4.1.2 After
Finishing the Work
1)
Connect the jumper plug (JP1) of the image processor PCB (service part; one side of the
pin is disconnected; try connecting both its feet).
2)
T u r n
on the power; then, when 'DATA ERROR' is indicated, press the Set key.
3) Enter the user data and the service mode data.
4) Make various adjustments for the electrical system of the machine. (See 1.2.4 of Chapter
7.)
5) If the machine is equipped with ADF functions, make various adjustments for the ADF.
(See 1.3 of Chapter 7.)
COPYRlGHT(02002 CANON INC.
CANON PC1 WrnageCIASS
DGM)s
REV.
1
AUG.2002
7-1 7