(8: Book Test) - Canon PC1000s Service Manual

CHAPTER 2 USING THE MACHINE
Line Connection Reception Test (6-9: LINE DETECT)
A press on '9' on the keypad from the FACULTY TEST menu selects the LINE DETECT
test. On Test Menu 1, you can check C1, FC, state of hooking of the eternal telephone, and
@
the detection of signals by the NCU package.
Test Menu 1
A press on
'1'
on the keypad from the L I l E DETECT menu selects test menu
1.
In this
test, the LCD indication changes from 'OFF' to 'ON' when C1, FC, or off-set of the external
telephone is detected in relation to the telephone line.
Test Menu 3
A press on '3' on the keypad from the
LINE
DETECT menu selects test menu 3. In this
test, the LCD indication changes from 'OFF' to 'ON' when CNG is detected in relation to
the telephone terminal.
ESS Test (64: ESS TEST)
A press on the # key from the FACULTY TEST menu executes the ESS (Energy Save
Stanby: hereafter, ESS) test. In the course of execution, the test causes the machine to be in
ESS mode, causing all LEDs except the Energy Saver key in the control panel to go OFF.
The machine ends ESS mode for the following:
The Energy Saver key is pressed.
Print data arrives from the PC."
A fax
Off-hook set is d e t ~ t e d . ' ~
The report output time
arrive^.'^
The timer call time
*I: If equipped with printer functions.
*2: If equipped with fax functions.
3.20.9 BOOK Read Test (8: BOOK TEST)
A press on '8' on the keypad from the TEST MODE menu selects the BOOK test. A press
on '4' or ' 6 ' on the keypad during this test initializes the corresponding parameter as de-
scribed below:
'4' on the Keypad
The book read position parameter (#6 SCANNER 7: CCD 21.23) is initialized.
'6' on the Keypad
The BOOK read parameter (#6 SCANNER 7: CCD 18", 19,21,23) is initialized.
*1: The term ''CCD18 setting" refers to the setting for original read position adjustment ex-
.
ecuted by a press on '3' of the keypad under 'CCD
TEST' of
' T EST
MODE-
COPYRIGHT 02002 CANON INC. CANON PClOOOslimageCLASS D600s REV. 1 AUG.2002
2-79