Table of Contents
Advertisement
Table 3-2. PATX3070 Motherboard Specifications (Continued)
Characteristics
Motherboard
Motherboard I/O Connectors
Ethernet interface
Serial port interface (asynchronous)
Parallel port interface
Mouse interface
Keyboard interface
USB
Super I/O device
SCSI interface
Cooling Requirements
The PATX3070 motherboard is designed and tested to operate reliably in
open ambient air with a temperature range from 0° to 45° C (32° to 113° F)
with the fan heat sink providing the cooling for the CPU.
http://www.motorola.com/computer/literature
Height
2.5 inches (64 mm) with CPUs only
3.2 inches (81 mm) with CPUs and expansion
modules
Length/Width
Standard ATX form factor:
9.6 inches wide by 12 inches long
(244 mm x 305 mm)
One or two Intel 82559ER controllers. One or two
RJ-45 connectors. 10/100 Mbps interface speed.
9-pin D-sub, panel I/O
25-pin D-sub, panel I/O
6-pin mini DIN, panel I/O
6-pin mini DIN, panel I/O
Dual independent USB channels for 1.5Mbps and
12Mbps transfer rates allow for easy, hot plugging
of USB peripherals
National PC97317 controller. Two asynchronous
serial ports, one parallel port, PS/2 floppy port,
PS/2 keyboard/mouse interfaces, and an infrared
header.
Adaptec AIC-7895 (dual-channel Wide Ultra)
controller. Transfer rate of up to 40MBps per
channel. PCI bus master. HD-68 connector for each
channel.
Cooling Requirements
Specifications
3
3-5
Advertisement
Table of Contents
