BIOS Self-Test and Setup
2
BIOS Messages and Beep Codes
2-6
As indicated in
Table 2-2 on page
up a Help window with information pertaining to specific menus.
In addition, the hardware override described under
Control (PIIX RTC CMOS CLR J34) on page 1-12
the BIOS default settings without resorting to repeated boot attempts.
Once the defaults are restored, you can restart the Setup utility and make
necessary adjustments.
For further details on the Setup menus and the BIOS in general, refer to the
PATX3070 BIOS and Programmer's Reference Guide, listed in
A, Related
Documentation.
During POST, the BIOS may display status/error messages. For details on
those status/error messages, refer to the PATX3070 BIOS and
Programmer's Reference Guide, listed in
Documentation.
2-4, pressing <F1> or <Alt-H> brings
CMOS Battery Backup
enables you to restore
Appendix A, Related
Computer Group Literature Center Web Site
Appendix