Sandisk Ide Compactflash; Figure 1-9. Installing A Sandisk Ide Compactflash Card - Motorola PATX3070 Series Installation And Use Manual

Hardware Preparation and Installation
1

SanDisk IDE CompactFlash

Figure 1-9. Installing a SanDisk IDE CompactFlash Card

1-22
The SanDisk CompactFlash cards, which can be used on the PATX3070,
contain an intelligent controller for management of the Flash media. The
CompactFlash implementation mimics the file structure of a hard disk
drive. With a CompactFlash card installed, you can store and manipulate
files on the card as you would on a hard disk or floppy disk. For details on
installing this component, refer to the SanDisk IDE FlashDrive
Installation Guide at http://www.sandisk.com/cons/prod_lit.htm.
The general installation procedure is as follows (see
1. Start the CompactFlash card into the card guides on the
CompactFlash connector, J13.
2. Press the card gently into the connector until it seats.
Figure 1-9
2467 0101
Computer Group Literature Center Web Site
below):