SpectraLink NetLink e340 Configuration And Administration Manual page 57

SpectraLink Corporation
Message Description
System Locked NetLink SVP Server is locked
(with Busy Tone)
TFTP ERROR(x):yy A failure has occurred during a TFTP software
download. (x) is the file number which was
being downloaded; yy is an error code
describing the particular failure. Possible
error codes are:
01 = TFTP server did not find the requested
file.
02 = Access violation (reported from TFTP
server).
07 = TFTP server reported "No such user"
error.
16 = No TFTP server address
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did not
respond within a specified period of time.
Too Many Errors The handset continues to reset and cannot
be recovered.
Unknown A phrase is missing from your phintl file.
xx:yy:zz
Updating Code... Handset is downloading new software into
memory.
Updating ... The handset is internally updating its
software images
Waiting... Handset has attempted some operation
several times and failed
Wrong Code Type Internal consistency check failure.
72-1082-02-F.doc
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
Action
Try call again later, system has been
locked for maintenance
Error code 01, 02, 07 or 16 – check the
TFTP server configuration.
Error code 81, the handset will attempt to
download the file again.
For other messages, power off the handset,
then turn it on again to retry the download.
If the error repeats, note it and contact
SpectraLink Technical Support.
Fatal error. Return handset to SpectraLink.
Download new software from the
SpectraLink site per
Maintenance
None. When the progress bar fills the
display line the update operation is
complete on that file.
None. The handset may do this briefly after
a download. This is informational only.
None. The handset is waiting for a
specified period of time before attempting
that operation again.
Assure that the license type is set to 9, and
that the slnk_cfg.cfg file indicates the
proper code is pd11ccc.bin.
Software
.
Page 57