Connecting RTD cable
Perform the following steps for each RTD cable.
1. Remove cap and ferrule from cable gland and slide onto cable.
2. Remove one of the blind plugs (
3. Push cable through gland opening.
4. Attach an RTD cable crimp lug on the blue wire
equivalent.
SITRANS FS230
Compact Operating Instructions, 12/2019, A5E38755607-AB
①
Wire to Isource + (black)
②
Wire to Vsense + (white)
③
Wire to Isource - (green)
①
②
or
) and fit cable gland.
⑤
of the cable by using a crimp tool or
5
4
3
2
1
④
Wire to Vsense - (red)
⑤
Wire to ground (blue)
Connecting
4.5 Connecting the external DSL
39