Introduction - Kellfri 35-VKM195H Manual

INTRODUCTION

Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Flexible flail mower with hydraulic side shift adjustment
• 35 cm hydraulic side shift adjustment
• 195 cm working width
• 32 forged hammer flails
• Adjustable supporting roller at rear
• Wear skids on sides
Kellfri's VKM195H flail mower is designed to quickly manage everything from cutting/topping
of grassland, clearing overgrown land with saplings to slashing straw stubble.
The 1.95 metre working width ensures a top clearing speed per hour. The fast rotation speed
and the weight from the 32 forged hammer flails ensure the machine can very easily cut and
hack all types of materials; fits tractors with between 40 and 50 hp.
The machine is only intended for cutting and topping of grassland. Clean the cutting area from
objects such as stones, branches, etc. before starting the operation. The machine defined as
single purpose equipment.
TECHNICAL SPECIFICATION
Working width
Weight
Flails
Power requirements
Driving speed of the tractor
Gearbox: oil type
RPM
PTO Shaft
35-VK195H
195 cm
350 kg
32 Hammer flails
40-50 hp
6-12km/h
Transmission oil 80W-90 (1L)
540
Standard
Table of contents
3