Related Manuals for Kellfri 34-FHH8
Summary of Contents for Kellfri 34-FHH8
- Page 1 34-FHH8 FEEDER FOR HORSES 8 OPENINGS Read the operating instructions carefully before using the product! Operating instructions translated from Swedish...
-
Page 2: Table Of Contents
Deviation form Warranty terms and conditions Kellfri designs and supplies efficient, affordable machinery and components for forestry, agriculture, construction and gardening in Sweden, the rest of the Nordic region and Europe. Please note that the information in this document is general and may not pertain to your particular product. -
Page 3: Introduction
INTRODUCTION Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions, operating manual and sound common sense will guarantee many years of enjoyment using the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse enthusiasts and other country dwellers with stringent performance demands. -
Page 4: Safety Instructions
Unauthorised modifications and/or accessories may cause life-threatening injuries or death to users and others. Kellfri is not liable for any modifications, changes or rebuilds carried out by customers. Where the machine is used professionally, employers are responsible for ensuring that users of the machine have theoretical and practical knowledge of the machine and that work is performed in a safe manner. -
Page 5: Surroundings
SURROUNDINGS Check that the work area is free from bystanders and objects before hitching or using the equipment. Otherwise, there is a risk of serious injury. Be extra careful if there are children in the vicinity of the area where the equipment or product is used or stored. Check that there are no low-hanging electrical cables within the work area. -
Page 6: Use
Only those who understand the safety instructions and the operating manual may use the equipment or product. Exercise caution and care when working with the equipment or product and only use it in the way described in the instruction manual. There is a risk of crushing when working with equipment that has moving parts. -
Page 7: Maintenance And Service
Contact your local authority for further information. Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice. -
Page 8: Feeders
FEEDERS Important factors to consider when choosing a feeder for animals • Different animals/individuals have different conditions, behaviours and temperaments. Whether you have horses, cattle or sheep, there are different breed types, ages, individuals and thus different behaviours. You know how your animals behave and what is best for them, and in order to avoid injuries we ask you to think about how they react in various contexts where a feeder is involved. -
Page 9: Feeding Horses In Pastures
The feeding area should always be clean and dry. Avoid having too few feeders for the number of animals. • The feeder must not be left empty! Kellfri’s feeders are designed to have feed in and nothing else. • When the feeder is not in use, it must not be left in the pasture. -
Page 10: Warning Decals
WARNING DECALS Make sure warning decals are always visible and clean them when necessary. Do not use a high-pressure washer directly on the warning decal. If apart with a decal is replaced, or the decal becomes worn or in any other way unusable, order a new set of decals. SYMBOL EXPLANATION Read the operating manual! Before carrying out work. -
Page 11: Parts Included In The 34-Fhh8
PARTS INCLUDED 34-FHH8 M10x75 – 4 pcs. M10x30 – 2 pcs. M10x55 – 4 pcs. bottom part 1 pc. bolt M8 x 60 4 pcs. M12x50 – 8 pcs. M8x55 – 8 pcs. corner post 4 pcs. corner protector 4 pcs. M12x25 – 4 pcs. roof strap 2 pcs. -
Page 12: Assembly Instructions
ASSEMBLY INSTRUCTIONS Bottom (A): Fit 2 base supports (F) 4 x M10x75 bolts 4 x M10 nuts Bolt: M10x75 Nut: M10 Fit corner posts, 4 pcs. (B1 and B2). Install all bolts and tighten. 4 x M12x25 4 x M12 Table of contents... - Page 13 Bolt: M12x50 Nylock nut M12 Install the headboards (N) 8 x M12x50 bolts 8 x M12 Nylock nuts 8 x pins with links Pin with link Table of contents...
- Page 14 M10x55 M8x55 M8x55 bolt M8 nut M10x55 bolt M10 nut • Install the roof supports (K) • Fit the stabiliser stays (E) • Then install the roof plate (M) on the roof supports Table of contents...
- Page 15 Assembly of roof and protection arches 4 bolts M8x60 (I) 4 corner protectors (J) 2 roof straps (C) 2 protection arches front (L) 2 tubes for protection arch - side (D) Lock the ends of the roof straps with bolts, M8x60 Table of contents...
- Page 16 Table of contents...
-
Page 17: Notes
NOTES: Table of contents... - Page 18 NOTES: Table of contents...
-
Page 19: Deviation Form
DEVIATION FORM We are grateful for your help in pointing out any defects in the product supplied to you by Kellfri. Before making a claim, read Kellfri’s general purchase terms and conditions in our catalogue or on our website www.kellfri.co.uk, and in the operating manual if supplied. -
Page 20: Warranty Terms And Conditions
You are always welcome to give feedback or ask us about our equipment and products. Kellfri AB has a policy of continuous product development and therefore reserves the right to make modifications, e.g. to the design and appearance of the product, without prior notice.