Keysight Technologies N9030B Installation Note page 12

Pxa signal analyzer, option hl1 microwave preselector bypass (mpb) and low noise path (lnp)

Hide thumbs Also See for N9030B:

Table of Contents

Option HL1 Microwave Preselector Bypass (MPB) and Low Noise Path (LNP) Retrofit Kit

10.Refer to

Figure

7. Locate the 87222-60026 switch, N9020-00022 bracket, and N9020-60087

ribbon cable in the kit. Install the bracket (1) to the switch (2) using three 0515-1934 screws

provided (3). Assure the number 3 on the switch is positioned as shown. Torque screws to 6

inch-lbs. Install the ribbon cable (4) into the switch connector header.

Figure 7

Bracket Mount to Switch

Installation Note N9030-90083

Table of Contents