Installation Of A Battery Tray - pellenc RASION 2 EASY User Manual

Overloading the bag may damage it. Before attaching the collecting bin to the lawn mower, always check it for
holes, tears or damage.
Lift the ejection flap (9) and slide the collecting bin (20) into
the notches located at the rear of the mower.
Note
Always check that the collecting bin is correctly attached to the lawn mower before you begin mowing.

4.3. INSTALLATION OF A BATTERY TRAY

The basic mower is equipped with a 750/1200/1500 battery tray. To use a ULIB 400/700/1100 battery or a alpha 520,
the factory-installed bracket must be removed and replaced it with an adapted bracket (option).
Remove the 4 fixing screws of the battery tray (12) already
in place.
Place the desired battery tray (12) on the frame tube.
Install and tighten the 4 fixing screws of the battery tray (12).
Note
An optional power cable is needed for the type batteries.
LAWN MOWER RASION 2 EASY
59_141654-A
59N_18_034
13