Ulib 400/700/1100 Battery (Red Connector): Installation And Connection - pellenc RASION 2 EASY User Manual

Connect the power cable (10) of the mower to the battery
connector.
Screw up tight and check that the cable is properly connect-
ed.
Caution
To prolong the life of the connectors, it is advisable to protect them when they are disconnected.
Therefore, avoid leaving the connector in contact with abrasive or dirty surfaces, or subjecting it to
major impacts (falls).

4.5. ULIB 400/700/1100 BATTERY (RED CONNECTOR): INSTALLATION AND CONNECTION

After having installed the appropriate battery tray, the procedure for installing a ULIB 400/700/1100 battery identical.
Check battery autonomy (23) before use. If necessary,
recharge the battery using the charger (25) supplied with the
battery.
Slide the battery (23) from the rear into the upper hooks of
the battery tray (22).
Release the back of the battery to position it horizontally on
the tray.
Push up the rear clips until they click.
Check that the battery is completely locked on the tray.
LAWN MOWER RASION 2 EASY
59_141654-A
59N_18_042
59N_18_038
59N_18_039
15