Entering Timed Events - Waters 2545 Binary Gradient Module Operator's Manual

Entering timed events

To enter the timed events:
1. In the Modify Instrument Method screen, click the Events tab.
Entering timed events
2. In the Initial Switch States area, set the Switch 1 state. You can set the
four event switches to the states you want at the start of each run.
Valid switch states
State
No Change
Toggle
Pulse
2-14 Preparing for operation
Description
Keeps the switch at its current state.
Changes the switch to the opposite state.
Transmits a single toggle pulse. The contact closure is
maintained for the number of minutes that you set in the
Param field. The range is 0.01 to 100.00 minutes.