Selecting Programmable Switch Functions - Lectrosonics LT Series Quick Start Manual

When the switch is turned on, the mute icon appearance will change, the
word MUTE will blink at the bottom of the display, and the power/function LED
will blink blue.
b 19
51
MUTE
494.500
<–MUTE–>
If the programmable switch function is set for Talkback, the Main Window will
indicate that the function is enabled but not active.
b 19
TB
51
494.500
-40 -20
When the programmable switch is turned on, the talkback icon appearance
will change and the power/function LED will glow blue.
b 19
TB
51
494.500
-40 -20

Selecting Programmable Switch Functions

The programmable switch on the top panel can be
configured using the menu to provide several functions:
• Power - turns the power on and off
Mute - mutes the audio when switched on
•
TalkBk (talkback) - redirects the audio to
•
a different output channel on the receiver (with
receivers that offer this function)
(none) - disables the switch
•
NOTE: The programmable switch will continue to operate whether or
not keypad changes are locked.
www.lectrosonics.com
Main Window will blink
the word MUTE when
the audio is muted
Top Panel LED will
blink blue when the
audio is muted
Talkback
function is
enabled but
not active
0
The TB icon will
change when
Talkback is active
Top Panel LED will
glow blue when
Talkback is active
0
Gain
LineIn
Freq.
ProgSw
11