Setup Menu; Selecting Autoon Feature; Selecting Programmable Switch Functions - Lectrosonics duet DCHT-B1C1 Instruction Manual

Flex List
Name
Name the DCHT, DCHT/E01 to allow easy identifica-
tion on the M2R FlexList. The following are available for
custom names:
- NameTx: Name the DCHT, DCHT/E01
- NameCh1: Name Channel 1
- NameCh2: Name Channel 2
Use the UP and DOWN arrows to choose which
character you want and then MENU/SEL to move to next
space (there are 8 spaces available for each name). Press
BACK to save.
NOTE: Duplicate names are not allowed in a FlexList. Be
sure to choose unique names for Tx, Ch1 and Ch2.
NameTx
Cursor
DCHT
Sync DCHT, DCHT/E01 information to the M2R FlexList
either as one stereo Channel or individual channels:
- SendTx: Send (sync) all receiver information to
the M2R FlexList as one stereo channel
- SendCh1: Send (sync) Channel 1 unique infor-
mation to the M2R FlexList
- SendCh2: Send (sync) Channel 2 unique infor-
mation to the M2R FlexList
- SendM12: Send (sync) a mono mix of both
channels to the M2R FlexList
SendTx SendCh1
Sync Sync
Rio Rancho, NM
Press the and
arrow buttons to select
the desired character,
press MENU/SELECT
to move to next space;
there are 8 spaces
available.
Use the arrow
button to begin sync

Setup Menu

Selecting AutoOn Feature

If external power is switched off or batteries fail while the
unit is transmitting, the unit will automatically turn back
on after power is restored or fresh batteries are installed.
This function is enabled by selecting Yes in the menu
options.
Setup... AutoOn?
AutoOn?
ProgSw
Remote
NOTE: AutoOn does not work when the
transmitter is in the Standby mode.
Selecting Programmable Switch
Functions
The programmable switch on the top panel can be con-
figured using the menu to provide several functions:
• (none) - disables the switch
• Mute - mutes the audio when switched on; LCD
will blink a message
• Power - turns the power on and off
Setup... ProgSw
AutoOn?
ProgSw
Remote
NOTE: The programmable switch will continue
to operate whether or not keypad changes are
locked.
Enable/Disable Remote Control Function
The "dweedle tone" remote control is turned on or off
with the Remote menu, setting the transmitter to react to
tones received (Enable) or to Ignore the tones.
Setup... Remote
AutoOn?
Enable
ProgSw
Ignore
Remote
NOTE: Remote control of settings is enabled
using a third party smart phone app named
DCHTRemote, published by New Endian, LLC.
Digital Transmitter
No
Yes
Press the
arrow buttons to select
the desired function or
Mute
disable the switch
and
13