Lectrosonics LT Series Quick Start Manual page 8

4) Select Step Size
This menu item allows frequencies to be selected in either 100 kHz or 25 kHz
increments.
Rolloff
Compat
StepSiz
Phase
If the desired frequency ends in .025, .050 or .075 MHz, the 25 kHz step size
must be selected.
Normally, the receiver is used to find a clear operating frequency. All Lectro-
sonics Digital Hybrid Wireless
ly and easily find prospective frequencies with little or no RF interference. In
other cases, a frequency may be specified by officials at a large event such as
the Olympics or a major league ball game. Once the frequency is determined,
set the transmitter to match the associated receiver.
Selecting Frequency
The setup screen for frequency selection offers several ways to browse the
available frequencies.
Gain
LineIn
Freq.
ProgSw
Each field will step through the available frequencies in a different increment.
The increments are also different in the 25 kHz mode from the 100 kHz mode.
Freq.
b 19
51
494.500
Freq.
b 19
51
494.500
8
StepSiz
100 kHz
25 kHz
receivers provide a scanning function to quick-
®
Freq.
b 19
51
494.500
These two fields step in 25
kHz increments when the
step size is 25 kHz and 100
kHz increments when the
step size is 100 kHz.
These two fields
always step in the
same increments
1 block steps
1 MHz steps
StepSiz
100 kHz
25 kHz
Press MENU/
SEL to select
one of four
fields to make
adjustments
Freq.
b 19
494.500
Freq.
b 19
51
494.500
LECTROSONICS, INC.
51