Additional Installation Instructions For Flush-Fit Installation - Miele KM 7404 FX Operating And Installation Instructions

Additional installation instructions for flush-fit installation

 Damage caused by unsuitable sealant.
Unsuitable sealant can damage natural stone.
For natural stone worktops and natural stone tiles, only use
silicone sealant that is specially formulated for natural stone.
Please follow the manufacturer's instructions.

The internal width of the base unit underneath the appliance must
be at least as wide as the internal cut-out width of the worktop (see
"Installation - Installation dimensions - flush-fit"). This is to ensure
that the cooktop is easily accessible from underneath after
installation and the bottom half of the casing can be removed for
maintenance. If the underside of the cooktop is not freely accessible
after installation, any sealant used to plug the gaps around the
appliance must be removed to enable the cooktop to be lifted out of
the cut-out should this be necessary.

A flush-fit cooktop is suitable only for installation in natural stone
(granite, marble), solid wood and tiled worktops. When using a
worktop made from any other material, please check first with the
worktop manufacturer that it is suitable for installing a flush-fit
cooktop.
- Natural stone worktops: the cooktop is placed directly in the cut-
out.
- Solid wood, tiled worktops: the cooktop is placed on a wooden
frame inside the cut-out. The frame must be provided on site and
is not supplied with the appliance.
Installation
69