100 To 240 Vac Power Supply; Xr-300M Product Group; X-300Eec Product Group - Siemens SCALANCE X-300 Series Operating Instructions Manual

6.6.2

100 to 240 VAC power supply

Danger to life from line voltage for devices with a 240 V AC supply voltage
This device can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Connecting and disconnecting may only be performed by an electrical specialist.
Connect or disconnect power supply cables only when the power is turned off!
Devices with a 100 ... 240 V AC supply voltage do not have an approval for hazardous areas
Devices with a 100 ...240 V AC supply voltage are not approved for use in hazardous areas
according to ATEX, IECEx, FM and UL HazLoc.
NOTICE
Securing cables with dangerous voltage
Make sure that the connector cannot be released accidentally by pulling on the connecting
cable. Lay the cables in cable ducts or cable channels and secure the cables, where
necessary, with cable ties.
6.6.2.1

XR-300M product group

Table 6-9
Device
XR324-12M
6.6.2.2

X-300EEC product group

Table 6-10
Device
X302-7EEC
X307-2EEC
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24
WARNING
WARNING
100 to 240 V AC voltage
Device version (power supply)
1 x 100 to 240 V AC
100 to 240 V AC voltage
Device version (power supply)
1 x 100 to 240 V AC / 60 to 250 V DC
2 x 100 to 240 V AC / 60 to 250 V DC
1 x 100 to 240 V AC / 60 to 250 V DC
2 x 100 to 240 V AC / 60 to 250 V DC
Connecting
6.6 Power supply
100 to 240 V voltage
Redundant Single
- ●
100 to 240 V voltage
Redundant Single
- ●
● -
- ●
● -
135