Siemens SCALANCE X-300 Series Operating Instructions Manual page 286

Certifications and approvals
11.7 Product group XR-300M PoE
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described is
intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms
with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore no
declaration of conformity relating to the EC Machinery Directive 2006/42/EEC for this product.
FM
The product meets the requirements of the standards:
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
Note
Only variants with 24 VDC power supply meet the requirements of this approval.
C-Tick
The product meets the requirements of the AS/NZS 2064 standard (Class A).
286
Emission
EN 61000-6-4 : 2007
Operating Instructions, 11/2019, A5E01113043-24
Requirements
Immunity to interference
EN 61000-6-2 : 2005
SCALANCE X-300