Siemens SCALANCE X-300 Series Operating Instructions Manual page 296

Certifications and approvals
11.9 Product group SFP
ATEX (explosion protection directive)
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document here:
● On the data medium that ships with some products:
● On the Internet pages of Siemens Industry Online Support
The SIMATIC NET products described in these operating instructions meet the requirements
of the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially
Explosive Atmospheres".
Note
Type of protection of the device
The devices are approved for various types of protection. You can find the type of protection of
your device and the ATEX certificate number on the nameplate.
Note
Use the plug-in transceivers only SIMATIC NET devices that are listed in the ATEX certificate
KEMA 07ATEX0145 X.
296
WARNING
– Product CD / product DVD
– SIMATIC NET Manual Collection
support.industry.siemens.com/cs/ww/en/ps/15273/cert)
(https://
Operating Instructions, 11/2019, A5E01113043-24
SCALANCE X-300