Storage - Thermo Scientific ES Series User Manual

8. Insert the door into the top, left hand hinge (figure 8).
9. Install the bottom, left hand hinge (figure 9) and screw in the feet.
Figure 8 Figure 9
10. Add the feet and base plate to the bottom, right hand side.
11. Remove the caps from the screws holding the handle in position.
12. Remove the handle screws.
13. Remove the caps on the opposite side of the door.
14. Screw the handle into position and add the caps to cover the screws.

Storage

If the freezer is to remain unused for a period of time (e.g. during refurbishment work) switch
the equipment off by pressing the power button and disconnect the power supply to the
cabinet at the wall socket. It is also advised that the equipment is unplugged from the power
supply. Empty, defrost and clean the freezer. Make sure the door is left slightly ajar to prevent
any bad odours forming within the cabinet.
14