Intelligent Platform Management Interface (Ipmi) - Tripp Lite B050-000 Owner's Manual

Passthrough access to serial port via Telnet/SSH:
Using this option it is possible to connect an arbitrary device to the serial port and access it (assuming it
provides terminal support) via Telnet or SSH. Select the appropriate options for the serial port and use the Telnet
Console or a standard Telnet/SSH client to connect to the B050-000. For more information about the Telnet
interface you may have a look at the Section called Telnet Console.

Intelligent Platform Management Interface (IPMI)

Generals
You have an additional way to power on or off the system or to perform a hard reset by using the B050-000 IPMI
capabilities. It also provides the ability to show an event log of the host system and the status of some system sensors
(i.e. temperature). If your host system supports IPMI, you can access it by one of the following ways:
• IPMI over LAN (IPMI V1.5 is required)
6. Menu Options
Figure 6-33. IPMI
80