Table of Contents
Advertisement
Video Settings through the remote console
Brightness:
Controls the brightness of the picture.
Contrast:
Controls the contrast of the picture.
Clock:
Defines the horizontal frequency for a video line and depends on the video mode. Different video card types may
require different values. The default settings in conjunction with the auto adjustment procedure should be adequate
for all common configurations. To achieve a better picture quality you may try to change this setting together with
the sampling phase.
Phase:
Defines the phase for video sampling, used to control the display quality together with the setting for
sampling clock.
Horizontal Position:
Use the left and right buttons to move the picture in a horizontal direction while this option is selected.
Vertical Position:
Use the left and right buttons to move the picture in a vertical direction while this option is selected.
Reset this Mode:
Reset mode specific settings to the factory-defined defaults.
Reset all Modes:
Reset all settings to the factory-defined defaults.
Save Changes:
Save changes permanently.
5. Usage
Figure 5-10. Video Settings Panel
35
Advertisement
Table of Contents
